Super Thin FFU

Super thin FFU is generator set with super thin motor inside which is used in the turbulent layer and laminar flow clean room, where have limited installation space. Its speed can also reach to 0.45m/s ±20% same as other FFU.

It is 100mm thinner than the ordinary FFU. The material of cabinet is stainless steel, Galvanized steel with aluminum painting, Cold rolled steel with epoxy powder and so on. It is lighter, corrosion-resistance, rust-resistance and beautiful.

OEM

Customized design is available

Feature

1. Overheating protection

Inside equipped with overheating protection, the surface is smooth and bright, lower air resistance and good sound insulation. Special air entrance design can low down the noise effectively .

2. The average air speed increase to 25%

Long-life span, energy-saving, low noise, less maintenance, small vibration and adjustable speed. The average air speed increase to 25%.

3. Life-long span

It works as an average air speed of 0.45m/s. The outlet speed is stable and can shorten the period the replace filters. In the meantime, it can extend the service life of fans.

4. Space-saving

Light and convenient, easy and beautiful design. Let the using space reduced largely and the efficiency is higher. Not only improve the scope and space, but also energy saving.

Application

semiconductor, electron, flat-panel display, disc-drive, manufacture and optics, bio-engineering, clean bench, clean room, or any other places.

Hospital, pharmaceutical, laboratory, semiconductor, electronic, bio-engineering, clean bench, clean room, or any other place requires high cleanliness environment.

Specifications

Model

FUST-1

FUST-2

FUST-3

FUST-4

Size (WxLxHmm)

575x875x275

920x615x275

575x1175x275

615x1225x275

Air Flow (m³/h)

800~900

800~900

1100~1200

1100~1200

Average velocity

0.35 ~ 0.55  (m/s)