News

How to maintain the air shower is directly related to the working efficiency and service life of the air shower, so the workshop should pay attention to the maintenance of the automatic air shower.

Automatic doors are affected by the installation quality and the use environment, and problems are inevitable during use. If there is a long-term lack of maintenance, the hidden dangers and minor faults of the automatic door will not be handled in time, which will turn from minor faults to major faults, and may eventually lead to the paralysis of the automatic door.

 How to maintain the automatic door air shower: 

1. Check the wear of various parts of the automatic door air shower, check the support deviation and screw tightness of the automatic door air shower;

2. Check the tightness of the automatic door belt;

3. Check the motor output, door opening and closing width, speed, braking, etc. of the automatic door air shower controller;

4. Check whether the voltage parameters of the automatic door air shower are normal;

5. Repair and replace damaged parts of the automatic door air shower;

6. When the automatic air shower fails, press the emergency stop switch quickly, turn off the power, and then call the air shower manufacturer to send someone to check;

7. When the wind speed is found to be smaller, first check whether the surface of the primary air filter is black. If it is black, it means The pre-filter holds more dust and the resistance increases, so the non-woven fabric in the primary air filter should be removed for cleaning or replacement;

8. If the wind speed cannot be increased after replacing or cleaning the non-woven fabric, it means that the high-efficiency air filter is clogged, causing increased resistance, and the high-efficiency air filter should be replaced;

9. The primary filter of the air shower is generally replaced every six months, and the high-efficiency filter is replaced once a year;

10. When the air shower fan is not working, check whether the emergency switch of the outer box of the air shower is cut off. If it is cut off, press it lightly with your hand, turn it to the right and let it go;

11. Regularly inspect and repair the electrical circuit. If there is a fault, refer to the electrical schematic diagram for repair.

The above is about: "What maintenance should be done for the automatic door air shower" and everyone should remember to regularly maintain the air shower, which can save costs more effectively!